dmesg - Intel Xeon E5-2680 v4 27-09-16
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-642.4.2.el6.x86_64 (mockbuild@worker1.bsys.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-17) (GCC) ) #1 SMP Tue Aug 23 19:58:13 UTC 2016
Command line: ro root=/dev/mapper/vg_s11-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_s11/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rd_LVM_LV=vg_s11/lv_root rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000078f30000 (usable)
BIOS-e820: 0000000078f30000 - 000000007982b000 (reserved)
BIOS-e820: 000000007982b000 - 0000000079d4d000 (ACPI NVS)
BIOS-e820: 0000000079d4d000 - 0000000090000000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed45000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000001080000000 (usable)
SMBIOS version 3.0 @ 0xF05B0
SMBIOS 3.0 present.
DMI: Supermicro Super Server/X10SRi-F, BIOS 2.0 12/17/2015
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x1080000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
x2apic enabled by BIOS, switching to x2apic ops
last_pfn = 0x78f30 max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-0000000078f30000
0000000000 - 0040000000 page 1G
0040000000 - 0078e00000 page 2M
0078e00000 - 0078f30000 page 4k
kernel direct mapping tables up to 78f30000 @ 10000-13000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000001080000000
0100000000 - 1080000000 page 1G
kernel direct mapping tables up to 1080000000 @ 12000-13000
RAMDISK: 36e6f000 - 37fef2bf
ACPI: Deleted _OSI()
ACPI: Deleted _OSI()
ACPI: RSDP 00000000000f0580 00024 (v02 SUPERM)
ACPI: XSDT 0000000079887098 000B4 (v01 01072009 AMI 00010013)
ACPI: FACP 00000000798b7d08 0010C (v05 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI Warning: FADT (revision 5) is longer than ACPI 2.0 version, truncating length 268 to 244 (20090903/tbfadt-288)
ACPI: DSDT 00000000798871e8 30B1F (v02 SUPERM SMCI--MB 01072009 INTL 20091013)
ACPI: FACS 0000000079d4bf80 00040
ACPI: APIC 00000000798b7e18 001E0 (v03 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FPDT 00000000798b7ff8 00044 (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: FIDT 00000000798b8040 0009C (v01 SUPERM SMCI--MB 01072009 AMI 00010013)
ACPI: SPMI 00000000798b80e0 00040 (v05 SUPERM SMCI--MB 00000000 AMI. 00000000)
ACPI: MCFG 00000000798b8120 0003C (v01 SUPERM SMCI--MB 01072009 MSFT 00000097)
ACPI: UEFI 00000000798b8160 00042 (v01 SUPERM SMCI--MB 01072009 00000000)
ACPI: HPET 00000000798b81a8 00038 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: WDDT 00000000798b81e0 00040 (v01 SUPERM SMCI--MB 00000000 INTL 20091013)
ACPI: SSDT 00000000798b8220 170C7 (v02 SUPERM PmMgt 00000001 INTL 20120913)
ACPI: SSDT 00000000798cf2e8 0264C (v02 SUPERM SpsNm 00000002 INTL 20120913)
ACPI: SSDT 00000000798d1938 00064 (v02 SUPERM SpsNvs 00000002 INTL 20120913)
ACPI: PRAD 00000000798d19a0 00102 (v02 SUPERM SMCI--MB 00000002 INTL 20120913)
ACPI: DMAR 00000000798d1aa8 000E4 (v01 SUPERM SMCI--MB 00000001 INTL 20091013)
ACPI: HEST 00000000798d1b90 0027C (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: BERT 00000000798d1e10 00030 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: ERST 00000000798d1e40 00230 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: EINJ 00000000798d2070 00130 (v01 SUPERM SMCI--MB 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to cluster x2apic.
No NUMA configuration found
Faking a node at 0000000000000000-0000001080000000
Bootmem setup node 0 0000000000000000-0000001080000000
NODE_DATA [0000000000012000 - 0000000000045fff]
bootmap [0000000000100000 - 000000000030ffff] pages 210
(7 early reservations) ==> bootmem [0000000000 - 1080000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002044924] TEXT DATA BSS ==> [0001000000 - 0002044924]
#3 [0036e6f000 - 0037fef2bf] RAMDISK ==> [0036e6f000 - 0037fef2bf]
#4 [000009ec00 - 0000100000] BIOS reserved ==> [000009ec00 - 0000100000]
#5 [0002045000 - 000204554c] BRK ==> [0002045000 - 000204554c]
#6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000]
found SMP MP-table at [ffff8800000fda70] fda70
Reserving 133MB of memory at 48MB for crashkernel (System RAM: 67584MB)
[ffffea0000000000-ffffea00103fffff] PMD -> [ffff880028600000-ffff880036dfffff] on node 0
[ffffea0010400000-ffffea0039bfffff] PMD -> [ffff880038000000-ffff8800617fffff] on node 0
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x01080000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000010 -> 0x0000009e
0: 0x00000100 -> 0x00078f30
0: 0x00100000 -> 0x01080000
On node 0 totalpages: 16748222
DMA zone: 56 pages used for memmap
DMA zone: 102 pages reserved
DMA zone: 3824 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 477032 pages, LIFO batch:31
Normal zone: 222208 pages used for memmap
Normal zone: 16030720 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
Setting APIC routing to cluster x2apic.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0c] enabled)
ACPI: LAPIC (acpi_id[0x10] lapic_id[0x10] enabled)
ACPI: LAPIC (acpi_id[0x12] lapic_id[0x12] enabled)
ACPI: LAPIC (acpi_id[0x14] lapic_id[0x14] enabled)
ACPI: LAPIC (acpi_id[0x16] lapic_id[0x16] enabled)
ACPI: LAPIC (acpi_id[0x18] lapic_id[0x18] enabled)
ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x1a] enabled)
ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x1c] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0d] enabled)
ACPI: LAPIC (acpi_id[0x11] lapic_id[0x11] enabled)
ACPI: LAPIC (acpi_id[0x13] lapic_id[0x13] enabled)
ACPI: LAPIC (acpi_id[0x15] lapic_id[0x15] enabled)
ACPI: LAPIC (acpi_id[0x17] lapic_id[0x17] enabled)
ACPI: LAPIC (acpi_id[0x19] lapic_id[0x19] enabled)
ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x1b] enabled)
ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x1d] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x10] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x12] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x14] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x16] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x18] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x11] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x13] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x15] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x17] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x19] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x1d] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
SMP: Allowing 28 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 48
PM: Registered nosave memory: 000000000009e000 - 000000000009f000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000078f30000 - 000000007982b000
PM: Registered nosave memory: 000000007982b000 - 0000000079d4d000
PM: Registered nosave memory: 0000000079d4d000 - 0000000090000000
PM: Registered nosave memory: 0000000090000000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed45000
PM: Registered nosave memory: 00000000fed45000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
Allocating PCI resources starting at 90000000 (gap: 90000000:6ed1c000)
Booting paravirtualized kernel on bare hardware
NR_CPUS:4096 nr_cpumask_bits:28 nr_cpu_ids:28 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880061800000 s96600 r8192 d22184 u131072
pcpu-alloc: s96600 r8192 d22184 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15
pcpu-alloc: [0] 16 17 18 19 20 21 22 23 24 25 26 27 -- -- -- --
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16511576
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_s11-lv_root rd_NO_LUKS LANG=en_US.UTF-8 rd_NO_MD rd_LVM_LV=vg_s11/lv_swap SYSFONT=latarcyrheb-sun16 crashkernel=133M@0M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM rd_LVM_LV=vg_s11/lv_root rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
dmar: Queued invalidation will be enabled to support x2apic and Intr-remapping.
Memory: 65834520k/69206016k available (5460k kernel code, 2213128k absent, 1158368k reserved, 6959k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:1040
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 268435456 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
Fast TSC calibration using PIT
Detected 2400.063 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.12 BogoMIPS (lpj=2400063)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
using mwait in idle threads.
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 22343 entries in 88 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffd000 flags: 0x0
dmar: IOMMU 0: reg_base_addr fbffd000 ver 1:0 cap 8d2008c10ef0466 ecap f0205a
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 1: reg_base_addr fbffc000 ver 1:0 cap 8d2078c106f0466 ecap f020de
dmar: RMRR base: 0x0000007ba77000 end: 0x0000007ba86fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 1 under DRHD base 0xfbffc000
IOAPIC id 2 under DRHD base 0xfbffc000
HPET id 0 under DRHD base 0xfbffc000
Enabled IRQ remapping in x2apic mode
APIC routing finalized to cluster x2apic.
alloc irq_desc for 48 on node 0
alloc kstat_irqs on node 0
alloc irq_desc for 49 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
alloc irq_2_iommu on node 0
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2680 v4 @ 2.40GHz stepping 01
Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23 #24 #25 #26 #27 Ok.
Brought up 28 CPUs
Total of 28 processors activated (134403.52 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
PM: Registering ACPI NVS region at 7982b000 (5382144 bytes)
regulator: core version 0.5
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MCFG configuration 0: base 80000000 segment 0 buses 0 - 255
PCI: MCFG area at 80000000 reserved in E820
PCI: Using MMCONFIG at 80000000 - 8fffffff
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI: (supports S0 S4 S5)
ACPI: BIOS offers _GTS
ACPI: If "acpi.gts=1" improves suspend, please notify linux-acpi@vger.kernel.org
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
HEST: Enabling Firmware First mode for corrected errors.
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
PCI host bridge to bus 0000:ff
pci 0000:ff:12.0: reg 14: [mem 0x00000000-0x0000000f]
pci 0000:ff:12.0: reg 18: [mem 0x00000000-0x0000003f]
pci 0000:ff:12.0: reg 1c: [mem 0x00000000-0x0000000f]
pci 0000:ff:12.0: reg 20: [mem 0x00000000-0x0000003f]
pci 0000:ff:12.0: reg 24: [mem 0x00000000-0x0000000f]
pci 0000:ff:12.4: reg 14: [mem 0x00000000-0x0000000f]
pci 0000:ff:12.4: reg 18: [mem 0x00000000-0x0000003f]
pci 0000:ff:12.4: reg 1c: [mem 0x00000000-0x0000000f]
pci 0000:ff:12.4: reg 20: [mem 0x00000000-0x0000003f]
pci 0000:ff:12.4: reg 24: [mem 0x00000000-0x0000000f]
pci 0000:ff:1e.3: reg 10: [mem 0x00000010-0x0000001f pref]
ACPI: PCI Interrupt Routing Table [\_SB_.UNC0._PRT]
pci0000:ff: Requesting ACPI _OSC control (0x1d)
pci0000:ff: ACPI _OSC control (0x15) granted
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A08:00: host bridge window [io 0x1000-0xffff]
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A08:00: host bridge window [mem 0xfedb0000-0xfedb000f]
pci_root PNP0A08:00: host bridge window [mem 0xfedc0000-0xfedc000f]
pci_root PNP0A08:00: host bridge window [mem 0x90000000-0xfbffbfff]
pci_root PNP0A08:00: host bridge window [mem 0x380000000000-0x383fffffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xfedb0000-0xfedb000f]
pci_bus 0000:00: root bus resource [mem 0xfedc0000-0xfedc000f]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci_bus 0000:00: root bus resource [mem 0x380000000000-0x383fffffffff]
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PME# disabled
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PME# disabled
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: PME# disabled
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: PME# disabled
pci 0000:00:04.0: reg 10: [mem 0x383ffff1c000-0x383ffff1ffff 64bit]
pci 0000:00:04.1: reg 10: [mem 0x383ffff18000-0x383ffff1bfff 64bit]
pci 0000:00:04.2: reg 10: [mem 0x383ffff14000-0x383ffff17fff 64bit]
pci 0000:00:04.3: reg 10: [mem 0x383ffff10000-0x383ffff13fff 64bit]
pci 0000:00:04.4: reg 10: [mem 0x383ffff0c000-0x383ffff0ffff 64bit]
pci 0000:00:04.5: reg 10: [mem 0x383ffff08000-0x383ffff0bfff 64bit]
pci 0000:00:04.6: reg 10: [mem 0x383ffff04000-0x383ffff07fff 64bit]
pci 0000:00:04.7: reg 10: [mem 0x383ffff00000-0x383ffff03fff 64bit]
pci 0000:00:05.4: reg 10: [mem 0xfb315000-0xfb315fff]
pci 0000:00:14.0: reg 10: [mem 0xfb300000-0xfb30ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: PME# disabled
pci 0000:00:16.0: reg 10: [mem 0xfb314000-0xfb31400f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.0: PME# disabled
pci 0000:00:16.1: reg 10: [mem 0xfb313000-0xfb31300f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: PME# disabled
pci 0000:00:1a.0: reg 10: [mem 0xfb311000-0xfb3113ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: PME# disabled
pci 0000:00:1d.0: reg 10: [mem 0xfb310000-0xfb3103ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x383ffff21000-0x383ffff210ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0x0580-0x059f]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:02:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:02:00.0: reg 14: [mem 0xfb260000-0xfb263fff 64bit]
pci 0000:02:00.0: reg 1c: [mem 0xfb200000-0xfb23ffff 64bit]
pci 0000:02:00.0: reg 30: [mem 0xfb240000-0xfb25ffff pref]
pci 0000:02:00.0: supports D1 D2
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.2: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 10: [mem 0xfb120000-0xfb13ffff]
pci 0000:05:00.0: reg 18: [io 0xd020-0xd03f]
pci 0000:05:00.0: reg 1c: [mem 0xfb144000-0xfb147fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: PME# disabled
pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: reg 10: [mem 0xfb100000-0xfb11ffff]
pci 0000:05:00.1: reg 18: [io 0xd000-0xd01f]
pci 0000:05:00.1: reg 1c: [mem 0xfb140000-0xfb143fff]
pci 0000:05:00.1: PME# supported from D0 D3hot D3cold
pci 0000:05:00.1: PME# disabled
pci 0000:05:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:00:03.3: PCI bridge to [bus 05-05]
pci 0000:00:03.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.3: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:07:00.0: PME# disabled
pci 0000:00:1c.6: PCI bridge to [bus 07-08]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:08:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
pci 0000:08:00.0: reg 14: [mem 0xfb000000-0xfb01ffff]
pci 0000:08:00.0: reg 18: [io 0xc000-0xc07f]
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:08:00.0: PME# disabled
pci 0000:07:00.0: PCI bridge to [bus 08-08]
pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07.BR7A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR1A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR2A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR3A._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR3C._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR3D._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x15) granted
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
vgaarb: device added: PCI:0000:08:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:08:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
pci 0000:ff:1e.3: can't claim BAR 0 [mem 0x00000010-0x0000001f pref]: no compatible bridge window
pci 0000:ff:1e.3: can't reserve [mem 0x00000010-0x0000001f pref]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
alloc irq_desc for 50 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 51 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 52 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 53 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
alloc irq_desc for 54 on node -1
alloc kstat_irqs on node -1
alloc irq_2_iommu on node -1
HPET: 8 timers in total, 5 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 50, 51, 52, 53, 54, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
hpet: hpet2 irq 50 for MSI
hpet: hpet3 irq 51 for MSI
hpet: hpet4 irq 52 for MSI
hpet: hpet5 irq 53 for MSI
hpet: hpet6 irq 54 for MSI
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0cf8-0x0cff]
pnp 00:01: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:02: [mem 0xfec00000-0xfecfffff]
pnp 00:02: Plug and Play ACPI device, IDs PNP0003 (active)
pnp 00:03: [io 0x0000-0x000f]
pnp 00:03: [io 0x0081-0x0083]
pnp 00:03: [io 0x0087]
pnp 00:03: [io 0x0089-0x008b]
pnp 00:03: [io 0x008f]
pnp 00:03: [io 0x00c0-0x00df]
pnp 00:03: [dma 4]
pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:04: [io 0x0070-0x0071]
pnp 00:04: [io 0x0074-0x0077]
pnp 00:04: [irq 8]
pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:05: [io 0x00f0]
pnp 00:05: [irq 13]
pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:06: [io 0x0061]
pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
pnp 00:07: [mem 0xfed00000-0xfed003ff]
pnp 00:07: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:08: [io 0x0500-0x057f]
pnp 00:08: [io 0x0400-0x047f]
pnp 00:08: [io 0x0092]
pnp 00:08: [io 0x0010-0x001f]
pnp 00:08: [io 0x0072-0x0073]
pnp 00:08: [io 0x0080]
pnp 00:08: [io 0x0084-0x0086]
pnp 00:08: [io 0x0088]
pnp 00:08: [io 0x008c-0x008e]
pnp 00:08: [io 0x0090-0x009f]
pnp 00:08: [io 0x0580-0x059f]
pnp 00:08: [io 0x0600-0x061f]
pnp 00:08: [io 0x0880-0x0883]
pnp 00:08: [io 0x0800-0x081f]
pnp 00:08: [mem 0xfed1c000-0xfed3ffff]
pnp 00:08: [mem 0xfed45000-0xfed8bfff]
pnp 00:08: [mem 0xff000000-0xffffffff]
pnp 00:08: [mem 0xfee00000-0xfeefffff]
pnp 00:08: [mem 0xfed12000-0xfed1200f]
pnp 00:08: [mem 0xfed12010-0xfed1201f]
pnp 00:08: [mem 0xfed1b000-0xfed1bfff]
pnp 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:09: [io 0x0a00-0x0a0f]
pnp 00:09: [io 0x0a10-0x0a1f]
pnp 00:09: [io 0x0a20-0x0a2f]
pnp 00:09: [io 0x0a30-0x0a3f]
pnp 00:09: [io 0x0a40-0x0a4f]
pnp 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x0ca2]
pnp 00:0a: [io 0x0ca3]
pnp 00:0a: Plug and Play ACPI device, IDs IPI0001 (active)
pnp: PnP ACPI: found 11 devices
ACPI: ACPI bus type pnp unregistered
system 00:08: [io 0x0500-0x057f] has been reserved
system 00:08: [io 0x0400-0x047f] has been reserved
system 00:08: [io 0x0580-0x059f] has been reserved
system 00:08: [io 0x0600-0x061f] has been reserved
system 00:08: [io 0x0880-0x0883] has been reserved
system 00:08: [io 0x0800-0x081f] has been reserved
system 00:08: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:08: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:08: [mem 0xff000000-0xffffffff] has been reserved
system 00:08: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:08: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:08: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:08: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:09: [io 0x0a00-0x0a0f] has been reserved
system 00:09: [io 0x0a10-0x0a1f] has been reserved
system 00:09: [io 0x0a20-0x0a2f] has been reserved
system 00:09: [io 0x0a30-0x0a3f] has been reserved
system 00:09: [io 0x0a40-0x0a4f] has been reserved
pci 0000:00:03.3: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 05-05] add_size 100000
pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 06-06] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 06-06] add_size 200000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 06-06] add_size 200000
pci 0000:ff:12.0: BAR 2: can't assign mem (size 0x40)
pci 0000:ff:12.0: BAR 4: can't assign mem (size 0x40)
pci 0000:ff:12.4: BAR 2: can't assign mem (size 0x40)
pci 0000:ff:12.4: BAR 4: can't assign mem (size 0x40)
pci 0000:ff:12.0: BAR 1: can't assign mem (size 0x10)
pci 0000:ff:12.0: BAR 3: can't assign mem (size 0x10)
pci 0000:ff:12.0: BAR 5: can't assign mem (size 0x10)
pci 0000:ff:12.4: BAR 1: can't assign mem (size 0x10)
pci 0000:ff:12.4: BAR 3: can't assign mem (size 0x10)
pci 0000:ff:12.4: BAR 5: can't assign mem (size 0x10)
pci 0000:ff:1e.3: BAR 0: can't assign mem pref (size 0x10)
pci 0000:ff:1e.3: BAR 0: trying firmware assignment [mem size 0x00000010 pref]
pci 0000:ff:1e.3: BAR 0: [mem size 0x00000010 pref] conflicts with reserved [mem 0x00000000-0x0000ffff]
pci 0000:00:03.3: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 100000
pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
pci 0000:00:03.3: BAR 15: assigned [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.0: BAR 14: assigned [mem 0x90100000-0x902fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0x90300000-0x904fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:02.0: PCI bridge to [bus 02-02]
pci 0000:00:02.0: bridge window [io 0xe000-0xefff]
pci 0000:00:02.0: bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:03.0: PCI bridge to [bus 03-03]
pci 0000:00:03.2: PCI bridge to [bus 04-04]
pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit pref] get_res_add_size add_size 20000
pci 0000:05:00.0: res[10]=[mem 0x00000000-0xffffffffffffffff 64bit pref] get_res_add_size add_size 20000
pci 0000:05:00.1: res[7]=[mem 0x00000000-0xffffffffffffffff 64bit pref] get_res_add_size add_size 20000
pci 0000:05:00.1: res[10]=[mem 0x00000000-0xffffffffffffffff 64bit pref] get_res_add_size add_size 20000
pci 0000:05:00.0: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: BAR 7: assigned [mem 0x90000000-0x9001ffff 64bit pref]
pci 0000:05:00.0: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.0: BAR 10: assigned [mem 0x90020000-0x9003ffff 64bit pref]
pci 0000:05:00.1: reg 184: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: BAR 7: assigned [mem 0x90040000-0x9005ffff 64bit pref]
pci 0000:05:00.1: reg 190: [mem 0x00000000-0x00003fff 64bit pref]
pci 0000:05:00.1: BAR 10: assigned [mem 0x90060000-0x9007ffff 64bit pref]
pci 0000:00:03.3: PCI bridge to [bus 05-05]
pci 0000:00:03.3: bridge window [io 0xd000-0xdfff]
pci 0000:00:03.3: bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:03.3: bridge window [mem 0x90000000-0x900fffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 06-06]
pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
pci 0000:00:1c.0: bridge window [mem 0x90100000-0x902fffff]
pci 0000:00:1c.0: bridge window [mem 0x90300000-0x904fffff 64bit pref]
pci 0000:07:00.0: PCI bridge to [bus 08-08]
pci 0000:07:00.0: bridge window [io 0xc000-0xcfff]
pci 0000:07:00.0: bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.6: PCI bridge to [bus 07-08]
pci 0000:00:1c.6: bridge window [io 0xc000-0xcfff]
pci 0000:00:1c.6: bridge window [mem 0xfa000000-0xfb0fffff]
alloc irq_desc for 26 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:01.0: PCI INT A -> GSI 26 (level, low) -> IRQ 26
pci 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 32 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:02.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
pci 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 40 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:03.0: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.0: setting latency timer to 64
pci 0000:00:03.2: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.2: setting latency timer to 64
pci 0000:00:03.3: PCI INT A -> GSI 40 (level, low) -> IRQ 40
pci 0000:00:03.3: setting latency timer to 64
alloc irq_desc for 16 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 18 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:1c.6: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.6: setting latency timer to 64
pci 0000:07:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x1000-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xfedb0000-0xfedb000f]
pci_bus 0000:00: resource 8 [mem 0xfedc0000-0xfedc000f]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:00: resource 10 [mem 0x380000000000-0x383fffffffff]
pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:05: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:05: resource 2 [mem 0x90000000-0x900fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x1000-0x1fff]
pci_bus 0000:06: resource 1 [mem 0x90100000-0x902fffff]
pci_bus 0000:06: resource 2 [mem 0x90300000-0x904fffff 64bit pref]
pci_bus 0000:07: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:07: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:08: resource 0 [io 0xc000-0xcfff]
pci_bus 0000:08: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
IP route cache hash table entries: 524288 (order: 10, 4194304 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
alloc irq_desc for 19 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pci 0000:00:14.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:14.0: PCI INT D disabled
pci 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1a.0: PCI INT C disabled
pci 0000:00:1d.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1d.0: PCI INT C disabled
pci 0000:08:00.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 17920k freed
dmar: Device scope device [0000:00:1b.00] not found
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
Intel CQM monitoring enabled
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 8192 (order: 7, 524288 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1474958147.638:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key 45FD2EAD2AA3B215
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: setting latency timer to 64
alloc irq_desc for 55 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:01.0: irq 55 for MSI/MSI-X
pcieport 0000:00:02.0: setting latency timer to 64
alloc irq_desc for 56 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:02.0: irq 56 for MSI/MSI-X
pcieport 0000:00:03.0: setting latency timer to 64
alloc irq_desc for 57 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.0: irq 57 for MSI/MSI-X
pcieport 0000:00:03.2: setting latency timer to 64
alloc irq_desc for 58 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.2: irq 58 for MSI/MSI-X
pcieport 0000:00:03.3: setting latency timer to 64
alloc irq_desc for 59 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:03.3: irq 59 for MSI/MSI-X
pcieport 0000:00:1c.0: setting latency timer to 64
alloc irq_desc for 60 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.0: irq 60 for MSI/MSI-X
pcieport 0000:00:1c.6: setting latency timer to 64
alloc irq_desc for 61 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
pcieport 0000:00:1c.6: irq 61 for MSI/MSI-X
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp 0000:00:1c.0:pcie04: HPC vendor_id 8086 device_id 8d10 ss_vid 0 ss_did 0
pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
ACPI: acpi_idle yielding to intel_idle
[Firmware Bug]: No valid trip found
ERST: Error Record Serialization Table (ERST) support is initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 18, io mem 0xfb311000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-642.4.2.el6.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 18, io mem 0xfb310000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.32-642.4.2.el6.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
PNP: No PS/2 controller found. Probing ports directly.
mice: PS/2 mouse device common for all mice
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:04: setting system clock to 2016-09-27 06:35:49 UTC (1474958149)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 664k freed
Freeing unused kernel memory: 1556k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
ACPI: WMI: Mapper loaded
dracut: Starting plymouth daemon
usb 1-1: new high speed USB device number 2 using ehci_hcd
dracut: rd_NO_MD: removing MD RAID activation
megasas: 06.810.09.00-rh1
megaraid_sas 0000:02:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
megaraid_sas 0000:02:00.0: setting latency timer to 64
megaraid_sas 0000:02:00.0: FW now in Ready state
alloc irq_desc for 62 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 62 for MSI/MSI-X
alloc irq_desc for 63 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 63 for MSI/MSI-X
alloc irq_desc for 64 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 64 for MSI/MSI-X
alloc irq_desc for 65 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 65 for MSI/MSI-X
alloc irq_desc for 66 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 66 for MSI/MSI-X
alloc irq_desc for 67 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 67 for MSI/MSI-X
alloc irq_desc for 68 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 68 for MSI/MSI-X
alloc irq_desc for 69 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 69 for MSI/MSI-X
alloc irq_desc for 70 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 70 for MSI/MSI-X
alloc irq_desc for 71 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 71 for MSI/MSI-X
alloc irq_desc for 72 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 72 for MSI/MSI-X
alloc irq_desc for 73 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 73 for MSI/MSI-X
alloc irq_desc for 74 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 74 for MSI/MSI-X
alloc irq_desc for 75 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 75 for MSI/MSI-X
alloc irq_desc for 76 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 76 for MSI/MSI-X
alloc irq_desc for 77 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
megaraid_sas 0000:02:00.0: irq 77 for MSI/MSI-X
megaraid_sas 0000:02:00.0: firmware supports msix : (16)
megaraid_sas 0000:02:00.0: current msix/online cpus : (16/28)
megaraid_sas 0000:02:00.0: RDPQ mode : (disabled)
megaraid_sas 0000:02:00.0: Current firmware maximum commands: 1008 LDIO threshold: 0
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1: configuration #1 chosen from 1 choice
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
megaraid_sas 0000:02:00.0: Init cmd success
megaraid_sas 0000:02:00.0: firmware type : Extended VD(240 VD)firmware
megaraid_sas 0000:02:00.0: controller type : MR(1024MB)
megaraid_sas 0000:02:00.0: Online Controller Reset(OCR) : Enabled
megaraid_sas 0000:02:00.0: Secure JBOD support : No
megaraid_sas 0000:02:00.0: INIT adapter done
megaraid_sas 0000:02:00.0: Jbod map is not supported megasas_setup_jbod_map 4967
megaraid_sas 0000:02:00.0: pci id : (0x1000)/(0x005b)/(0x1000)/(0x9271)
megaraid_sas 0000:02:00.0: unevenspan support : no
megaraid_sas 0000:02:00.0: firmware crash dump : no
megaraid_sas 0000:02:00.0: jbod sync map : no
scsi0 : Avago SAS based MegaRAID driver
scsi 0:2:0:0: Direct-Access LSI MR9271-8i 3.46 PQ: 0 ANSI: 5
usb 2-1: new high speed USB device number 2 using ehci_hcd
xhci_hcd 0000:00:14.0: PCI INT D -> GSI 19 (level, low) -> IRQ 19
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
alloc irq_desc for 78 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
xhci_hcd 0000:00:14.0: irq 78 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 2.6.32-642.4.2.el6.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 2.6.32-642.4.2.el6.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 2-1: configuration #1 chosen from 1 choice
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
sd 0:2:0:0: [sda] 5622988800 512-byte logical blocks: (2.87 TB/2.61 TiB)
sd 0:2:0:0: [sda] Write Protect is off
sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 0:2:0:0: [sda] Attached SCSI disk
dracut: Scanning devices sda2 for LVM logical volumes vg_s11/lv_swap vg_s11/lv_root
dracut: inactive '/dev/vg_s11/lv_root' [50.00 GiB] inherit
dracut: inactive '/dev/vg_s11/lv_home' [2.54 TiB] inherit
dracut: inactive '/dev/vg_s11/lv_swap' [31.47 GiB] inherit
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_s11-lv_root
dracut: Loading SELinux policy
type=1404 audit(1474958150.339:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
usb 3-12: new high speed USB device number 2 using xhci_hcd
SELinux: 2048 avtab hash slots, 306596 rules.
Refined TSC clocksource calibration: 2399.998 MHz.
Switching to clocksource tsc
SELinux: 2048 avtab hash slots, 306596 rules.
usb 3-12: New USB device found, idVendor=0557, idProduct=7000
usb 3-12: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-12: configuration #1 chosen from 1 choice
hub 3-12:1.0: USB hub found
hub 3-12:1.0: 4 ports detected
usb 3-12.1: new low speed USB device number 3 using xhci_hcd
SELinux: 9 users, 12 roles, 4211 types, 236 bools, 1 sens, 1024 cats
SELinux: 81 classes, 306596 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext4), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
type=1403 audit(1474958150.873:3): policy loaded auid=4294967295 ses=4294967295
dracut:
usb 3-12.1: New USB device found, idVendor=0557, idProduct=2419
usb 3-12.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 3-12.1: configuration #1 chosen from 1 choice
usb 3-12.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-12.1: ep 0x82 - rounding interval to 32 microframes, ep desc says 40 microframes
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.0/input/input2
generic-usb 0003:0557:2419.0001: input,hidraw0: USB HID v1.00 Keyboard [HID 0557:2419] on usb-0000:00:14.0-12.1/input0
input: HID 0557:2419 as /devices/pci0000:00/0000:00:14.0/usb3/3-12/3-12.1/3-12.1:1.1/input/input3
generic-usb 0003:0557:2419.0002: input,hidraw1: USB HID v1.00 Mouse [HID 0557:2419] on usb-0000:00:14.0-12.1/input1
dracut: Switching root
udev: starting version 147
sd 0:2:0:0: Attached scsi generic sg0 type 0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
dca service started, version 1.12.1
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.3.0-k
igb: Copyright (c) 2007-2014 Intel Corporation.
alloc irq_desc for 43 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: PCI INT A -> GSI 43 (level, low) -> IRQ 43
igb 0000:05:00.0: setting latency timer to 64
alloc irq_desc for 79 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 79 for MSI/MSI-X
igb 0000:05:00.0: irq 79 for MSI/MSI-X
alloc irq_desc for 80 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 80 for MSI/MSI-X
alloc irq_desc for 81 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 81 for MSI/MSI-X
alloc irq_desc for 82 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 82 for MSI/MSI-X
alloc irq_desc for 83 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 83 for MSI/MSI-X
alloc irq_desc for 84 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 84 for MSI/MSI-X
alloc irq_desc for 85 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 85 for MSI/MSI-X
alloc irq_desc for 86 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 86 for MSI/MSI-X
alloc irq_desc for 87 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.0: irq 87 for MSI/MSI-X
igb 0000:05:00.0: added PHC on eth0
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth0: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:d9:15:88
igb 0000:05:00.0: eth0: PBA No: 050B00-000
igb 0000:05:00.0: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
alloc irq_desc for 44 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: PCI INT B -> GSI 44 (level, low) -> IRQ 44
igb 0000:05:00.1: setting latency timer to 64
alloc irq_desc for 88 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 88 for MSI/MSI-X
igb 0000:05:00.1: irq 88 for MSI/MSI-X
alloc irq_desc for 89 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 89 for MSI/MSI-X
alloc irq_desc for 90 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 90 for MSI/MSI-X
alloc irq_desc for 91 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 91 for MSI/MSI-X
alloc irq_desc for 92 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 92 for MSI/MSI-X
alloc irq_desc for 93 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 93 for MSI/MSI-X
alloc irq_desc for 94 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 94 for MSI/MSI-X
alloc irq_desc for 95 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 95 for MSI/MSI-X
alloc irq_desc for 96 on node 0
alloc kstat_irqs on node 0
alloc irq_2_iommu on node 0
igb 0000:05:00.1: irq 96 for MSI/MSI-X
igb 0000:05:00.1: added PHC on eth1
igb 0000:05:00.1: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.1: eth1: (PCIe:5.0Gb/s:Width x4) 0c:c4:7a:d9:15:89
igb 0000:05:00.1: eth1: PBA No: 050B00-000
igb 0000:05:00.1: Using MSI-X interrupts. 8 rx queue(s), 8 tx queue(s)
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
i801_smbus 0000:00:1f.3: SMBus using polling
EDAC MC: Ver: 2.1.0 Aug 23 2016
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6fa0
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffc
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6ffd
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6f60
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6fa8
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6f71
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6faa
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fab
EDAC sbridge: Seeking for: PCI ID 8086:6fac
EDAC sbridge: Seeking for: PCI ID 8086:6fad
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6faf
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f68
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f79
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6a
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6b
EDAC sbridge: Seeking for: PCI ID 8086:6f6c
EDAC sbridge: Seeking for: PCI ID 8086:6f6d
EDAC MC0: Giving out device to 'sbridge_edac.c' 'Broadwell Socket#0': DEV 0000:ff:12.0
EDAC sbridge: Ver: 1.1.1
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11rh
iTCO_wdt: Found a Wellsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:0a: [io 0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
ipmi_si 00:0a: The BMC does not support clearing the recv irq bit, compensating, but the BMC needs to be fixed.
ipmi_si 00:0a: Found new BMC (man_id: 0x002a7c, prod_id: 0x0834, dev_id: 0x20)
ipmi_si 00:0a: IPMI kcs interface initialized
power_meter ACPI000D:00: Found ACPI power meter.
Intel P-state driver initializing.
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts:
SELinux: initialized (dev dm-2, type ext4), uses xattr
Adding 32997372k swap on /dev/mapper/vg_s11-lv_swap. Priority:-1 extents:1 across:32997372k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
ip6_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
ip_tables: (C) 2000-2006 Netfilter Core Team
ADDRCONF(NETDEV_UP): eth0: link is not ready
igb 0000:05:00.0: eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
type=1305 audit(1474958158.590:4): audit_pid=2640 old=0 auid=4294967295 ses=4294967295 subj=system_u:system_r:auditd_t:s0 res=1
eth0: no IPv6 routers present